Global Truss F31 Black 1m

About the Global F31 Black 1m Single Tube

The Global F31 Black 1m single tube is the standard building block of the F31 line. At 1m and just under a kilo, it’s the go-to length for backdrop frames, photo-booth uprights, lightweight overhead bars for small LED fixtures, and uplighter mounts.

Typical Applications

• Backdrop and step-and-repeat photo-booth frames
• Lightweight overhead bars for small LED PARs and Astera tubes
• AV cable and signal-runs across small spans
• Uplighter, prop, and signage mounts in event venues

The Global F31 Black single-tube truss is the lightest member of the Global Truss F-series. A single matt-black 50mm aluminium tube with the same connector geometry as F32/F33/F34, it’s used wherever you need a clean, minimal structural line for display frames, photo-booth backdrops, lightweight overhead bars for small fixtures, and uplighter mounts. Pair multiple F31 tubes with the SPACER 105 to build mini parallel-tube grids when full square truss would be overkill.

Compatibility

Standard F-series M12 conical connector and pin/R-clip system. Compatible with the Global Truss F31 corner blocks, junction kits, and the 105mm spacer (SP0118) used to fix two parallel F31 tubes into a lightweight ladder.

Material & Build

Single 50mm OD x 2mm wall tube in EN-AW 6082 T6 aluminium with a hard-wearing matt black powder coat, the same aerospace-grade alloy used across the F-series. Manufactured under ISO 9001-certified quality management. The matt black powder coat matches the F34 Black line and does not affect the tube’s structural rating.